After his Masters degree, Martin moved from native Vienna, Austria, to CERN for his PhD work in the ATLAS muon group which he finished in 1999. Following a “fellowship” on numerical field computation...

Working on the development of novel gaseous detectors, Florian is a Fellow in the Gaseous Detector Development (GDD) group. 

He studied physics at TU Vienna and worked on nano fabrication...

./.

Michael Campbell is the leader of the Medipix design team in the Experimental Physics Department at CERN in Geneva, Switzerland where he has worked for over 30 years. He was leader of the...

Victor Coco has been a staff member of CERN since 2017 and is involved in the installation and commissioning of the upgrade of the LHCb Vertex Locator as well as the design of its second upgrade. He...

text ...

Benoit started his career as mechanical engineer, specialized in materials engineering, working in materials R&D before joining CERN to work with the CEA-Saclay team on the CMS magnet design. Within...

Federico Faccio is the leader of the CERN Microelectronics section. He received the M.S. degree in physics from the University of Turin, Italy  (1991) and the Ph.D. degree from INPG in Grenoble...

Federico Faccio is the leader of the CERN Microelectronics section. He received the M.S. degree in physics from the University of Turin, Italy  (1991) and the Ph.D. degree from INPG in Grenoble...

My background is in aeronautical and aerospace engineering, with a specialisation in the structural engineering and materials within these fields. After few years spent on the development of composite...

Following studies at the University of Twente, Matthias did his PhD research at Lawrence Berkeley National Laboratory, in collaboration with University of Twente and UC Berkeley, California...

Michael Moll is working on the characterization and development of radiation hard silicon detectors. He obtained his Ph.D. from the University of Hamburg in 1999 and then went to CERN working on the...

Dr. Paulo Moreira was born in Porto, Portugal. He holds a degree in applied physics from the University of Porto - Portugal, and a Ph.D. degree in electronics engineering from the University of North...

Eraldo Oliveri started working at CERN in 2006 for the TOTEM experiment. His areas of expertise include detector characterization, electronics integration, installation, commissioning and operation of...

Vincenzo is a Staff Computing Engineer in the EP-SFT group. He has joined CERN in 2019 and he has worked since then for the ROOT project of EP-SFT. He obtained a PhD in Computer Science from...

Petra Riedler is a senior staff in EP-DT, working on the development, study and construction of silicon pixel detectors. Petra first came to CERN to work as a doctoral student on the radiation damage...

André is a staff member and applied physicist in the EP-SFT group. Since October 2021, he has been the deputy coordinator of the EP R&D software work package, and became the work package leader in...

Jan Troska obtained his BSc in 1995 and his PhD in 1999 from Imperial College, London. He has been working on the implementation of optical data transmission systems in particle physics experiments...

Francois Vasey holds an electronics engineering degree from ETH-Zurich and a PhD degree in optoelectronics from EPF-Lausanne.  He joined CERN in 1994 to develop radiation resistant optical links for...

... text 

... text 

Alessandro Caratelli is a digital design engineer in the EP-ESE group. 

Together with Kostas Kloukinas, Alessandro is currently responsible of the CERN ASIC Support Service aiming to provide...

Etiennette Auffray is senior physicist in EP-CMX group. She first came at CERN as a technical student in 1990, then continued as a PhD student and postdoc working on the R&D on inorganic scintillators...

... text 

Jakob is a staff computer scientist in the EP-SFT group. He is deputy coordinator of the EP R&D software work package. Jakob is the original author and project leader of the CernVM File System, a...

Giulio Borghello is a member of the CERN Microelectronics Section since 2016. His work involves evaluating the radiation response of CMOS technologies used in ASICs developed in the Microelectronics...

Erica is an experimental particle physicist in the EP-CMG group. Her research interests revolve mainly around software event reconstruction, Higgs physics and silicon sensors characterisation. During...

Dominik has been working for his Diploma and Ph.D. on silicon detectors and search for physics beyond the Standard Model with the ZEUS experiment at HERA, receiving his Ph.D. from the University of...

Brieuc joined the CMS experiment in 2013 for his PhD (UCLouvain - CP3, Belgium) to work on double Higgs production analyses, b-tagging algorithms and Tracker commissioning. During his first postdoc...

... text

text ...

text ...

Walter Snoeys received the MS and Ph.D. degrees in electrical engineering from the Katholieke Universiteit Leuven in 1987, and from Stanford University in 1992, respectively. Before joining the...

Graeme is a senior staff scientist at CERN in the EP-SFT group has been a member of the ATLAS experiment for many years, holding leading roles in the software project, including Software Coordinator...

Henric Wilkens got his Ph.D. on the study of muons in Extensive Air shower using the L3+Cosmic extension of the L3 experiment. He joined CERN as a research fellow, and following his interest in...

Soledad is a Mechanical Engineer at CERN, with a bachelor’s degree in aerospace engineering and a master’s degree in mathematical engineering and computation. She focused her career on structural...

I am an Electronics Engineer, and during my PhD I specialised in power electronics. Particularly, my experience lies in the design of dc-dc converters, including the power stage, measurements and...

After finishing my master's degree in Aeronautical Engineering (Universidad Politécnica de Madrid), I focused my career on the structural analysis, working in several fields such as aeronautics...

...

Doctor in Applied Physics since December 2019, I also have an Engineering background specialized in Physics and Simulation. During my research, led at CERN in partnership with CEA Saclay, I simulated...

Joshua is an experimental particle physicist with a keen interest in software development and data analysis. He obtained his physics degree from the University of Göttingen and has been a member of...

Stefan Biereigel studied Electrical Engineering at EAH Jena, Germany. He joined CERN in 2018 as a doctoral student, researching All-Digital PLL and CDR circuits for radiation-tolerant clock generators...

Brieuc joined the CMS experiment in 2013 to work on b-tagging and be part of the Tracker Detector On Call team. He got his PhD in Experimental High Energy Physics from UCLouvain (Belgium) on SM and...

1. In 2012 I finished my electronic engineering degree, followed by a Microelectronic Engineering Honours Degree in 2013, and then a research master’s degree in 2014 at the University of Pretoria in...

During my Master and PhD in the ATLAS collaboration I worked on readout software and electronics for pixel detectors. My PhD focused on building a readout chain for a demonstrator setup for the ATLAS...

During my Master and PhD in the ATLAS collaboration I worked on readout software and electronics for pixel detectors. My PhD focused on building a readout chain for a demonstrator setup for the ATLAS...

Juan Miguel is an experimental physicist focused on software. He received his PhD from the University of Granada after working in The Pierre Auger Observatory. He did a postdoc at University College...

Leonardo is an electronic engineer with a background on digital IC design and working experiences in low level software design and physical systems simulations. Currently he is working on low power...

I am an Electronic Engineer with experience in Astrophysic and High Energy Physic instrumentation. I did my PhD at CERN within the CMS experiment studying the radiation hardness and precision timing...

Dr Rodrigo José da Silva (RJS) holds a PhD in Materials Science from UFSJ (Brazil), which included a research exchange at the Bristol Composites Institute, in the Aerospace Engineering Programme of...

Florian is an experimental physicist who has studied at TU Vienna and focused on the characterization of monolithic CMOS pixel detectors during his PhD at CERN. His main focus was on radiation...

Florian is an experimental physicist who has studied at TU Vienna and focused on the characterization of monolithic CMOS pixel detectors during his PhD at CERN. His main focus was on radiation...

Paul studied physics in Mainz, and quickly identified particle physics as his main field of interest. During his studies, he worked on analysis efforts searching for new physics with the ATLAS...

Since the beginning of my scientific carrier I put a key accent on deep level understanding, combining both hardware and analysis skills. I have worked at the ATLS collaboration for the Phase II pixel...

During her PhD at CERN, Desiree contributed to an R&D work-package aiming at a thorough understanding of micro-channel cooling as a highly efficient thermal management technique for Silicon Pixel...

...

João L. A. de Melo was born in Pico island, Azores-Portugal. He received the B.Sc. and M.Sc. degrees in electrical and computer engineering from the Faculty of Sciences and Technology of NOVA...

My research focuses on detector R&D and simulation for future upgrades, in particular the use of sub-nanosecond time information to improve the performance of RICH (Ring-Imaging Cherenkov) detectors i...

After finishing my PhD in material science and space technologies at EPFL, I joined to the EP-DT Engineering Office as a mechanical engineer. Within the R&D team, my objective will be to design, test...

Javier is a computer scientist from University Carlos III of Madrid. During the last few years, his focus has been on low-level software (e.g. operating systems, embedded software and electronics, and...

Bartlomiej is a Mechanical Engineer currently part of CERN’s EP-DT R&D programme, where he focuses on design, simulations, and testing activities for future tracking detectors. He earned his Master’s...

Magdalena Munker has done her PhD on CMOS sensors as a CERN Doctoral Student together with the University of Bonn. She is now a CERN Applied Physics fellow, working on testing and simulation of...

I am an Electronics Engineer from Serbia specializing in embedded systems. I have graduated at the Faculty of Technical Sciences, University of Novi Sad.
Previously, I was involved in FPGA design and...

....

After working at CMS for 10+ years with jet calibration and Particle Flow, I take on new challenges as a Research Fellow in the Noble Liquid Calorimetry for Future Accelerator Experiments project. We...

...

Dalila works on fast calorimeter simulation using Machine Learning techniques. She has a data science background and during her PhD she designed generative models for fast calorimeter simulation in...

...

During her Ph.D. at DESY, Hamburg, Swathi worked on developing methods to eliminate certain parasitic physics processes at the International Linear Collider and applied them for SUSY searches at the...

I am an aerospace engineer graduated at Politecnico di Milano. I pursued a PhD in the same field at Delft University of Technology. I joined the EP-DT-EO group as a post-doctoral research fellow in...

MSc Engineer from South Africa with previous experience in building and racing the UKZN Solar Car in the 2015 Bridgestone World Solar Challenge. Work experience spanning 6 years in the fields of...

Viros Sriskaran joined the Microelectronics Section of the Electronic Systems for the Experiments Group (ESE) of the Experimental Physics (EP) Department in 2016. He has been responsible for the...

Peter is an experimental physicist focused on applications and development of silicon pixel detectors. He did his Ph.D. with the University of Manchester where he was working on building and...

Lorenzo graduated in Astronautical and Space engineering in 2016. He continued his studies with a Ph.D. in accelerator physics in a collaboration among CERN (SY-STI-TCD section), the University of...

I am an experimental physicist with the main research interest in the field of gaseous particle detector systems. During my Ph.D.  I was mostly engaged in the optimization of their performance and the...

Tomas is a designer and developer of digital electronics and FPGA, System-on-Chip and micro-controller-based systems for embedded control and data acquisition. He develops and maintains the Xilinx...

Anna Vaskuri received her doctorate in the field of Measurement Science and Technology from Aalto University, Finland in 2018. After her graduation, Vaskuri worked for 2.5 years at the National...

Mateus is an experimental physicist with focus on the characterisation of new silicon pixel detectors. He obtained his Ph.D. degree from Geneva University with his thesis work on new monolithic and...

As a PhD student and postdoc working in the ATLAS collaboration, I have worked on many physics analyses and detector performance R&D works. SUSY searches have been my focus during my PhD. As a DESY...

Julian Weick is currently working on his Ph.D. on adaptive signal treatment and self-optimization for Malta chip arrays as part of the detector development group at CERN and the signal processing...

...

....

Justus is a doctoral student in the EP-DT group and is affiliated with Hamburg University.
He obtained his M.Sc. degree from Karlsruhe Institute of Technology (KIT). His work at the Institute of...

Justus is a doctoral student in the EP-DT group and is affiliated with Hamburg University.
He obtained his M.Sc. degree from Karlsruhe Institute of Technology (KIT). His work at the Institute of...

...

Florine is a doctoral student at CERN in the EP-SFT group and at the University of Twente in the Netherlands. Her work focuses on the design and development of efficient data reduction and...

Doctoral student specializing in analog integrated circuit design, from Central China Normal University. During master, worked on the design of high-precision Time-to-Digital Converter (TDC) and Time...

• Mechanical engineering school in Albi, France
• 3 years professional experience as a CAD software development engineer in Toulouse
• Enrolled as a PhD student at Paul Sabatier University and in...

...

....

I am a doctoral student at CERN specialising in monolithic CMOS silicon sensors. I graduated with a master degree in physics from the Justus Liebig University in Giessen. During my studies, I gained...

Student at Wroclaw University of Science and Technology in the field of Mechanical Engineering with the specialisation in Refrigeration and Cryogenics. She is involved in designing a new cryogenic...

...

Jakob Haimberger studied physics at the technical university in Vienna. During his master he worked on automation software for low temperature thermal conductivity measurements. Since 2020 Jakob...

Marius Mæhlum Halvorsen first joined CERN in 2019 as a technical student to work on timing properties of silicon detectors. His work was carried out with the LHCb VELO group and the SSD lab, which...

... text

Djunes Janssens studied physics at the Vrije Universiteit Brussel (VUB) in Belgium. As a CERN summer student in 2019, he worked on the discrepancy between measured and simulated gas gains in GEM...

Theoretical physicist from Slovakia with a bachelor's degree from Charles University in Prague. Previous experience includes measurement and simulation of quantum turbulence in superfluid helium. ...

...

I studied physics at the University of Heidelberg, Germany, where I obtained my Master's in 2017. After that, I spent 6 months as a research assistant at TRIUMF in Vancouver, Canada. Since July 2018...

Milana Lalović was born on 31.08.1994. in Sarajevo, Bosnia and Herzegovina. In 2013 she enrolled to the University of Belgrade, School of Electrical Engineering. She graduated from Nanoelectronics...

...

First technical and now doctoral student at CERN, member of the LHCb collaboration, he is currently doing research on the upgrade of the detector’s electromagnetic calorimeter exploring novel fast...

I am PhD associated with Hamburg University.

I did my bachelor and master studies at the Lund University developing neutron detectors. Previously I have been working for a detector group at the...

Francesco holds a Bachelor's degree in Aerospace Engineering and a Master's degree in Space and Astronautical Engineering from the University of Rome La Sapienza. During his thesis, he completed an...

Sebastian Pape is a doctoral student at the EP-DT-SSD group.
He is affiliated with the TU Dortmund University, where he obtained his M.Sc. degree in 2020.

For his Master thesis he worked on Low Gain...

Aurora is currently a doctoral student at CERN, participating in the EP R&D Phase 2 program while pursuing a Ph.D. in Physics at the University of Milano Bicocca. She obtained her bachelor's and...

I am a doctoral student specialising in analog circuits design. During my master internship, I worked at the University of Geneva as circuit designer for monolithic pixel sensors addressing ToF PET...

Roberto studied Industrial Engineering in Seville, Spain. He began his research career with a scholarship from the Spanish National Research Council (CSIC), where he studied nanophosphor-based...

Leonhard is a doctoral student in the Wolfgang-Gentner-Programme in cooperation with the university of Bonn. His work focuses on developing an improved electron reconstruction algorithm for Key4Hep...

Experimental physicist, working on the maintenance, operation and development of gas systems for particle detectors. Gianluca studied plasma physics at the University of Milano-Bicocca (IT). Gianluca...

I am a 24 years old student coming from Naples, Italy and I am master degree student in electronic engineering working here at CERN as a technical student. In particular, I’m working on the effects of...

Milou is an engineer who has studied at the Technical University of Twente (Netherlands) , where she specialized in device physics and characterization of semiconductor devices, such as photovoltaic...

I am a CERN doctoral student specializing in characterizing novel, fine-pitch pixel detectors. During my PhD, I have tested CLICpix2 readout ASICs bump-bonded to planar sensors, in both laboratory and...

I am an Energy Engineer specialized in Heat Transfer and Fluid Mechanics. During my PhD I have been working on cryogenic cooling systems for superconducting magnets including neon, nitrogen and argon...

Placido Fernandez Declara is a computing engineer focused on high-performance computing, frameworks and software engineering. During his PhD at the LHCb experiment he developed and improved tracking...

Roger Forty studied physics at Oxford and Cambridge universities before gaining his PhD at Imperial College London working on the NA14 experiment at CERN, studying charm production with one of the...

I am an experimental physicist with a strong interest in computing and detector development. As a doctoral student, I was already working on the Future Circular Collider Design Study, writing my...